ASTM BOS 08.04

Download ASTM BOS 08.04
(Book of Standard Volume 08.04 Bundle) + (Vol 08.05)

ASTM Standards for Plastic Piping, Non-Metal Pipes, Polyethylene & Polypropylene Pipes

ASTM BOS 08.04+08.05 is a comprehensive collection of ASTM standards covering plastic piping systems used across industrial, commercial, municipal, and residential applications.
This volume includes specifications, test methods, practices, and terminology for non-metallic piping materials, with a strong emphasis on polyethylene (PE), polypropylene (PP), and other thermoplastic pipe systems.
It provides essential guidance for the design, manufacturing, installation, inspection, and performance evaluation of plastic pipes and fittings.

Engineers, manufacturers, laboratories, contractors, and quality assurance professionals rely on this volume to ensure compliance with international requirements. The standards support applications such as gas distribution, potable water, sewerage, drainage, irrigation, and industrial process piping.

ASTM BOS 08.04 also covers joining methods, pressure testing, durability, and long-term performance of plastic piping components.
This bundle is an invaluable technical resource for professionals working with modern plastic piping technologies.
Download ASTM Vol 08.04 to access the latest ASTM standards for plastic piping, non-metal pipes, polyethylene (PE), and polypropylene (PP) pipe systems.

this package includes:

PART-1 (D1598 to D5813)
_________

1. D1598-15a Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure
2. D1599-14e Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings
3. D1785-15 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120
4. D2122-16 Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
5. D2152-13 Standard Test Method for Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion
6. D2235-04 (Reapproved 2016) Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings
7. D2239-12 Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter
8. D2241-15 Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)
9. D2290-16 Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe
10. D2321-14 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
11. D2412-11 Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading
12. D2444-99 (Reapproved 2010) Standard Practice for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)
13. D2464-15 Standard Specification for Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
14. D2466-15 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40
15. D2467-15 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
16. D2513-14 Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
17. D2564-20 Standard Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems
18. D2609-15 Standard Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe
19. D2657-07 (Reapproved 2015) Standard Practice for Heat Fusion Joining of Polyolefin Pipe and Fittings
20. D2661-14 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings
21. D2665-14 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
22. D2672-14 Standard Specification for Joints for IPS PVC Pipe Using Solvent Cement
23. D2680-01 (2014) Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping
24. D2683-14 Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing
25. D2729-11 Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
26. D2737-12 Standard Specification for Polyethylene (PE) Plastic Tubing
27. D2749-13 Standard Symbols for Dimensions of Plastic Pipe Fittings
28. D2774-12 Standard Practice for Underground Installation of Thermoplastic Pressure Piping
29. D2837-13 Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products
30. D2846/D2846M-14 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems
31. D2855-15 Standard Practice for the Two-Step (Primer and Solvent Cement) Method of Joining Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Piping Components with Tapered Sockets
32. D2949-10 Standard Specification for 3.25-in. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
33. D3034-16 Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
34. D3035-15 Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter
35. D3122-15 Standard Specification for Solvent Cements for Styrene-Rubber (SR) Plastic Pipe and Fittings
36. D3138-04-2016 Standard Specification for Solvent Cements for Transition Joints Between Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Non-Pressure Piping Components
37. D3139-98 (Reapproved 2011) Standard Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals
38. D3212-07 (Reapproved 2013) Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals
39. D3261-24  Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
40. D3311-11 (Reapproved 2016) Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns
41. D3485-15 Standard Specification for Coilable High Density Polyethylene (HDPE) Cable in Conduit (CIC)
42. D5813-04(2012) Standard Specification for Cured-In-Place Thermosetting Resin Sewer Piping Systems

PART-2 (F402 to F1974)
_________

1. F402-05 (Reapproved 2012) Standard Practice for Safe Handling of Solvent Cements, Primers, and Cleaners Used for Joining Thermoplastic Pipe and Fittings
2. F409-12 Standard Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings
3. F412-16 Standard Terminology Relating to Plastic Piping Systems
4. F437-15 Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
5. F438-15 Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40
6. F439-13 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
7. F441/F441M-15 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80
8. F442/F442M-13 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR–PR)
9. F449-16 Standard Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control
10. F477-14 Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe
11. F480-14 Standard Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80
12. F481-97(2014) Standard Practice for Installation of Thermoplastic Pipe and Corrugated Pipe in Septic Tank Leach Fields
13. F493-22 Standard Specification for Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings
14. F512-12 Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings for Underground Installation
15. F585-16 Standard Guide for Insertion of Flexible Polyethylene Pipe Into Existing Sewers
16. F610/F610M-15 Standard Practice for Evaluating the Quality of Molded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings by the Heat Reversion Technique
17. F628-12 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core
18. F645-15 Standard Guide for Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems
19. F656-21 Standard Specification for Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings
20. F667/F667M-16 Standard Specification for 3 through 24 in. Corrugated Polyethylene Pipe and Fittings
21. F714-13 Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter
22. F725-03 (Reapproved 2013) Standard Practice for Drafting Impact Test Requirements In Thermoplastic Pipe And Fittings Standards
23. F758-14 Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Plastic Underdrain Systems for Highway, Airport, and Similar Drainage
24. F794-03-2014 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter
25. F810-12 Standard Specification for Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Waste Disposal Absorption Fields
26. F876-15 Standard Specification for Crosslinked Polyethylene (PEX) Tubing
27. F877-23 Standard Specification for Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems
28. F891-16 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core
29. F894-13 Standard Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe
30. F905-04(2011) Standard Practice for Qualification of Polyethylene Saddle-Fused Joints
31. F913-02(2014) Standard Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe
32. F949-15 Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings
33. F1025-94-2011 Standard Guide for Selection and Use of Full-Encirclement-Type Band Clamps for Reinforcement or Repair of Punctures or Holes in Polyethylene Gas Pressure Pipe
34. F1041-02 (Reapproved 2016) Standard Guide for Squeeze-Off of Polyolefin Gas Pressure Pipe and Tubing
35. F1055-16 Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and Tubing
36. F1056-04 (Reapproved 2011) Standard Specification for Socket Fusion Tools for Use in Socket Fusion Joining Polyethylene Pipe or Tubing and Fittings
37. F1057-10 Standard Practice for Estimating the Quality of Extruded Poly (Vinyl Chloride) (PVC) Pipe by the Heat Reversion Technique
38. F1216-16 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube
39. F1281-24 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe
40. F1282-23a Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe
41. F1290-98a (Reapproved 2011) Standard Practice for Electrofusion Joining Polyolefin Pipe and Fittings
42. F1336-15 Standard Specification for Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings
43. F1365-91(2013) Standard Test Method for Water Infiltration Resistance of Plastic Underground Conduit Joints Which Use Flexible Elastomeric Seals
44. F1412-16 Standard Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems
45. F1417-11a(2015 ) Standard Practice for Installation Acceptance of Plastic Non-pressure Sewer Lines Using Low-Pressure Air
46. F1429-99(2014) Standard Test Method for Assembly Force of Plastic Underground Conduit Joints That Use Flexible Elastomeric Seals Located in the Bell
47. F1473-16 Standard Test Method for Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins
48. F1483-15 Standard Specification for Oriented Poly(Vinyl Chloride), PVCO, Pressure Pipe
49. F1488-14 Standard Specification for Coextruded Composite Pipe
50. F1498-08(2012) Standard Specification for Taper Pipe Threads 60° for Thermoplastic Pipe and Fittings
51. F1499-12 Standard Specification for Coextruded Composite Drain, Waste, and Vent Pipe (DWV)
52. F1504-14 Standard Specification for Folded Poly(Vinyl Chloride) (PVC) Pipe for Existing Sewer and Conduit Rehabilitation
53. F1533-01 (Reapproved 2009) Standard Specification for Deformed Polyethylene (PE) Liner
54. F1545-15a Standard Specification for Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges
55. F1563-01-2011 Standard Specification for Tools to Squeeze-off Polyethylene (PE) Gas Pipe or Tubing
56. F1588-96(2015) Standard Test Method for Constant Tensile Load Joint Test (CTLJT)
57. F1606-05-2014 Standard Practice for Rehabilitation of Existing Sewers and Conduits with Deformed Polyethylene (PE) Liner
58. F1668-16 Standard Guide for Construction Procedures for Buried Plastic Pipe
59. F1673-10(2016)e1 Standard Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems
60. F1674-11 Standard Test Method for Joint Restraint Products for Use with PVC Pipe
61. F1675-13 Standard Practice for Life-Cycle Cost Analysis of Plastic Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits
62. F1697–09 (Reapproved 2015) Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduit
63. F1698–02 (Reapproved 2015) Standard Practice for Installation of Poly(Vinyl Chloride)(PVC) Profile Strip Liner and Cementitious Grout for Rehabilitation of Existing Man-Entry Sewers and Conduits
64. F1732-12 Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer and Drain Pipe Containing Recycled PVC Material
65. F1733-13 Standard Specification for Butt Heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA) Plastic Pipe and Tubing
66. F1734–03 (Reapproved 2009) Standard Practice for Qualification of a Combination of Squeeze Tool, Pipe, and Squeeze-Off Procedures to Avoid Long-Term Damage in Polyethylene (PE) Gas Pipe
67. F1735–09 (Reapproved 2015) Standard Specification for Poly (Vinyl Chloride) (PVC) Profile Strip for PVC Liners for Rehabilitation of Existing Man-Entry Sewers and Conduits
68. F1741–08 (Reapproved 2016) Standard Practice for Installation of Machine Spiral Wound Poly (Vinyl Chloride) (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits
69. F1743–08 (Reapproved 2016) Standard Practice for Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP)
70. F1759-97(2010) Standard Practice for Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications
71. F1760-16 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content
72. F1802-15 Standard Test Method for Performance Testing of Excess Flow Valves
73. F1803-15 Standard Specification for Poly (Vinyl Chloride)(PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter 
74. F1804–08 (Reapproved 2016) Standard Practice for Determining Allowable Tensile Load for Polyethylene (PE) Gas Pipe During Pull-In Installation
75. F1807-15 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring, or Alternate Stainless Steel Clamps, for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
76. F1866-13 Standard Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings
77. F1867–06 (Reapproved 2012) Standard Practice for Installation of Folded/Formed Poly (Vinyl Chloride) (PVC) Pipe Type A for Existing Sewer and Conduit Rehabilitation
78. F1871-11 Standard Specification for Folded/Formed Poly-(Vinyl Chloride) Pipe Type A for Existing Sewer and Conduit Rehabilitation
79. F1901-16 Standard Specification for Polyethylene (PE) Pipe and Fittings for Roof Drain Systems
80. F1924-12 Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing
81. F1947-10 Standard Practice for Installation of Folded Poly(Vinyl Chloride) (PVC) Pipe into Existing Sewers and Conduits
82. F1948-15 Standard Specification for Metallic Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing
83. F1960-15 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing
84. F1962-11 Standard Guide for Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings
85. F1970-12 Standard Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems
86. F1973-13 Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) and Polyamide 12 (PA12) Fuel Gas Distribution Systems
87. F1974–09 (Reapproved 2015) Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe

PART-3  (F2019 to F2735)
_________

1. F2019-11 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Pulled in Place Installation of Glass Reinforced Plastic Cured-in-Place (GRP-CIPP) Using the UV-Light Curing Method
2. F2021-11 Standard Guide for Design and Installation of Plastic Siphonic Roof Drainage Systems
3. F2023-15 Standard Test Method for Evaluating the Oxidative Resistance of Crosslinked Polyethylene (PEX) Pipe, Tubing and Systems to Hot Chlorinated Water
4. F2080-16 Standard Specification for Cold-Expansion Fittings with Metal Compression-Sleeves for Crosslinked Polyethylene (PEX) Pipe and SDR9 Polyethylene of Raised Temperature (PE-RT) Pipe
5. F2098-15 Standard Specification for Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) to Metal Insert and Plastic Insert Fittings
6. F2135-01(2012) Standard Specification for Molded Drain, Waste, and Vent (DWV) Short-Pattern Plastic Fittings
7. F2136–08 (Reapproved 2015) Standard Test Method for Notched, Constant Ligament-Stress (NCLS) Test to Determine Slow-Crack-Growth Resistance of HDPE Resins or HDPE Corrugated Pipe
8. F2138-12 Standard Specification for Excess Flow Valves for Natural Gas Service
9. F2145-13 Standard Specification for Polyamide 11 (PA 11) and Polyamide 12 (PA12) Mechanical Fittings for Use on Outside Diameter Controlled Polyamide 11 and Polyamide 12 Pipe and Tubing
10. F2159-14 Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring, or Alternate Stainless Steel Clamps for SDR9 Crosslinked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
11. F2160-22 Standard Specification for Solid Wall High Density Polyethylene (HDPE) Conduit Based on Controlled Outside Diameter (OD)
12. F2164-21 Standard Practice for Field Leak Testing of Polyethylene (PE) and Crosslinked Polyethylene (PEX) Pressure Piping Systems Using Hydrostatic Pressure
13. F2165-13 Standard Specification for Flexible Pre-Insulated Plastic Piping
14. F2206-14 Standard Specification for Fabricated Fittings of Butt-Fused Polyethylene (PE)
15. F2207-06(2013) Standard Specification for Cured-in-Place Pipe Lining System for Rehabilitation of Metallic Gas Pipe
16. F2231-02(2013) Standard Test Method for Charpy Impact Test on Thin Specimens of Polyethylene Used in Pressurized Pipes
17. F2261-06(2011) Standard Test Method for Pressure Rating Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40 and 80 Socket-Type
18. F2263-14(2019) Standard Test Method for Evaluating the Oxidative Resistance of Polyethylene (PE) Pipe to Chlorinated Water
19. F2306/F2306M-14 Standard Specification for 300 mm to 1500 mm [12 in. to 60 in.] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Non-Pressure Gravity-Flow Storm Sewer and Subsurface Drainage Applications
20. F2331-11(2016) Standard Test Method for Determining Chemical Compatibility of Substances in Contact with Thermoplastic Pipe and Fittings Materials
21. F2389-15 Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems
22. F2390-12 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent (DWV) Pipe and Fittings Having Post-Industrial Recycle Content
23. F2418-16 Standard Specification for Polypropylene (PP) Corrugated Wall Stormwater Collection Chambers
24. F2433-05(2013) Standard Test Method for Determining Thermoplastic Pipe Wall Stiffness
25. F2434-14 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Cross-linked Polyethylene/Aluminum/Cross-linked Polyethylene (PEX-AL-PEX) Tubing
26. F2435-22 Standard Specification for Steel Reinforced Polyethylene (PE) Corrugated Pipe
27. F2487-13 Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Corrugated High Density Polyethylene and Polypropylene Pipelines
28. F2509-15 Standard Specification for Field-assembled Anodeless Riser Kits for Use on Outside Diameter Controlled Polyethylene and Polyamide-11 (PA11) Gas Distribution Pipe and Tubing
29. F2510/F2510M-07 Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures and Corrugated Dual- and Triple-Wall Polyethylene and Polypropylene Pipes
30. F2536-06-2011 Standard Guide for Installing Plastic DWV Piping Suspended from On-Grade Slabs
31. F2561-16 Standard Practice for Rehabilitation of a Sewer Service Lateral and Its Connection to the Main Using a One Piece Main and Lateral Cured-in-Place Liner
32. F2562/F2562M-15 Specification for Steel Reinforced Thermoplastic Ribbed Pipe and Fittings for Non-Pressure Drainage and Sewerage
33. F2599-16 Standard Practice for Sectional Repair of Damaged Pipe By Means of an Inverted Cured-In-Place Liner
34. F2600-09(2013) Standard Specification for Electrofusion Type Polyamide-11 Fittings for Outside Diameter Controlled Polyamide-11 Pipe and Tubing
35. F2618-15 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings for Chemical Waste Drainage Systems
36. F2619/F2619M-13 Standard Specification for High-Density Polyethylene (PE) Line Pipe
37. F2620-13 Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings
38. F2623-14 Standard Specification for Polyethylene of Raised Temperature (PE-RT) Systems for Non-Potable Water Applications
39. F2634-15 Standard Test Method for Laboratory Testing of Polyethylene (PE) Butt Fusion Joints using Tensile-Impact Method
40. F2648/F2648M-13 Standard Specification for 50 mm to 1500 mm [2 in. to 60 in.] Annular Corrugated Profile Wall Polyethylene (PE) Pipe and Fittings for Land Drainage Applications
41. F2649-14 Standard Specification for Corrugated High Density Polyethylene (HDPE) Grease Interceptor Tanks
42. F2657-07-2012 Standard Test Method for Outdoor Weathering Exposure of Crosslinked Polyethylene (PEX) Tubing
43. F2658-07 Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) SDR 51 and SDR 64 Sewer Pipe and Fittings
44. F2720/F2720M-09 Standard Specification for Glass Fiber Reinforced Polyethylene (PE-GF) Spiral Wound Large Diameter Pipe
45. F2735-09 Standard Specification for Plastic Insert Fittings For SDR9 Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing

PART-4–ASTM BOS 08.05 (F2737 to F3564)
______________________

1. ASTM F2737-11 Standard Specification for Corrugated High Density Polyethylene (HDPE) Water Quality Units
2. ASTM F2763/F2763M-16 Standard Specification for 12 to 60 in. [300 to 1500 mm] Dual and Triple Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications
3. ASTM F2764/F2764M-23 Standard Specification for 6 in. to 60 in. [150 mm to 1500 mm] Polypropylene (PP) Corrugated Double and Triple Wall Pipe and Fittings for Non-Pressure Sanitary Sewer Applications
4. ASTM F2767-12 Standard Specification for Electrofusion Type Polyamide-12 Fittings for Outside Diameter Controlled Polyamide-12 Pipe and Tubing for Gas Distribution
5. ASTM F2769-22 Standard Specification for Polyethylene of Raised Temperature (PE-RT) Plastic Hot and Cold-Water Tubing and Distribution Systems
6. ASTM F2785-12 Standard Specification for Polyamide 12 Gas Pressure Pipe, Tubing, and Fittings
7. ASTM F2786-16 Standard Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Gaseous Testing Media Under Pressure (Pneumatic Leak Testing)
8. ASTM F2787-13(2018) Standard Practice for Structural Design of Thermoplastic Corrugated Wall Stormwater Collection Chambers
9. ASTM F2788/F2788M-15 Standard Specification for Metric and Inch-sized Crosslinked Polyethylene (PEX) Pipe
10. ASTM F2805-16 Standard Specification for Multilayer Thermoplastic And Flexible Steel Pipe And Connections
11. ASTM F2806-10 (Reapproved 2015) Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Metric SDR-PR)
12. ASTM F2817-13 Standard Specification for Poly (Vinyl Chloride) (PVC) Gas Pressure Pipe and Fittings For Maintenance or Repair
13. ASTM F2818-10(2014 ) Standard Specification for Specification for Crosslinked Polyethylene (PEX) Material Gas Pressure Pipe and Tubing
14. ASTM F2829/F2829M-15 Standard Specification for Metric- and Inch-Sized Fittings for Crosslinked Polyethylene (PEX) Pipe
15. ASTM F2831-12 Standard Practice for Internal Non Structural Epoxy Barrier Coating Material Used In Rehabilitation of Metallic Pressurized Piping Systems
16. ASTM F2854-10 (Reapproved 2016) Standard Specification for Push-Fit Crosslinked Polyethylene (PEX) Mechanical Fittings for Crosslinked Polyethylene (PEX) Tubing
17. ASTM F2855-12 Standard Specification for Chlorinated Poly(Vinyl Chloride)/Aluminum/Chlorinated Poly(Vinyl Chloride) (CPVC-AL-CPVC) Composite Pressure Tubing
18. ASTM F2880-14 Standard Specification for Lap-Joint Type Flange Adapters for Polyethylene Pressure Pipe in Nominal Pipe Sizes 34 in. to 65 in.
19. ASTM F2881 -21e1 Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications
20. ASTM F2896-11 Standard Specification for Reinforced Polyethylene Composite Pipe For The Transport Of Oil And Gas And Hazardous Liquids
21. ASTM F2897-15a Standard Specification for Tracking and Traceability Encoding System of Natural Gas Distribution Components (Pipe, Tubing, Fittings, Valves, and Appurtenances)
22. ASTM F2905  -13 Standard Specification for Crosslinked Polyethylene (PEX) Line Pipe For Oil and Gas Producing Applications
23. ASTM F2922-13(2018) Standard Specification for Polyethylene (PE) Corrugated Wall Stormwater Collection Chambers
24. ASTM F2928-13 Standard Practice for Specimens and Testing Conditions for Testing Polyethylene (PE) Pipe Butt Fusions Using Tensile and Hydrostatic Test Methods
25. ASTM F2929-13 Standard Specification for Crosslinked Polyethylene (PEX) Tubing of 0.070 in. Wall and Fittings for Radiant Heating Systems up to 75 psig
26. ASTM F2945-15 Standard Specification for Polyamide 11 Gas Pressure Pipe, Tubing, and Fittings
27. ASTM F2946-12 Standard Specification for PVC Hub and Elastomeric Seal (Gasket) Tee Connection for Joining Plastic Pipe to Insitu Pipelines and Manholes
28. ASTM F2947/F2947M-14 Standard Specification for 150 to 1500 mm [6 to 60 in.] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications
29. ASTM F2968/F2968M-14 Standard Specification for Crosslinked Polyethylene (PEX) Pipe for Gas Distribution Applications
30. ASTM F2969-12 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) IPS Dimensioned Pressure Pipe
31. ASTM F2986-12 Standard Specification for Corrugated Polyethylene Pipe and Fittings for Mine Leachate, Heap Leach Aeration and Other Mining Applications
32. ASTM F2994-13 Standard Practice for Utilization of Mobile, Automated Cured-In-Place Pipe (CIPP) Impregnation Systems
33. ASTM F3033-16 Standard Practice for Installation of a Single-Sized, Cured-In-Place Liner Utilizing an Inflatable Bladder for Resurfacing Manhole Walls of Various Shapes and Sizes
34. ASTM F3034-15 Standard Specification for Billets made by Winding Molten Extruded Stress-Rated High Density Polyethylene (HDPE)
35. ASTM F3058-16 Standard Practice for Preliminary Field Testing of Thermoplastic Pipe Joints for Gravity Flow (Non-Pressure) Sewer Lines
36. ASTM F3097-22 Standard Practice for Installation of an Outside Sewer Service Cleanout through a Minimally Invasive Small Bore Vacuum Excavation and Same Day Restoration
37. ASTM F3123-16 Standard Specification for Metric Outside Diameter Polyethylene (PE) Plastic Pipe (DR-PN)
38. ASTM F3124-15E Standard Practice for Data Recording the Procedure used to Produce Heat Butt Fusion Joints in Plastic Piping Systems or Fittings
39. ASTM F3128-15 Standard Specification for Poly(Vinyl Chloride) (PVC) Schedule 40 Drain, Waste, and Vent Pipe with a Cellular Core
40. ASTM F3181-16 Standard Test Method for The Un-notched, Constant Ligament Stress Crack Test (UCLS) for HDPE Materials Containing Post- Consumer Recycled HDPE
41. ASTM F3182-16 Standard Practice for the Application of Spray-Applied Polymeric Liners Inside Pipelines for Potable Water
42. ASTM F3183-16 Standard Practice for Guided Side Bend Evaluation of Polyethylene Pipe Butt Fusion Joint
43. ASTM F3190-16 Standard Practice for Heat Fusion Equipment (HFE) Operator Qualification on Polyethylene (PE) and Polyamide (PA) Pipe and Fittings
44. ASTM F3203-16 Standard Test Method for Determination of Gel Content of Crosslinked Polyethylene (PEX) Pipes and Tubing
45. ASTM F3219-19 Standard Specification for 3 in. to 30 in. (75 mm to 750 mm) Polypropylene (PP) Corrugated Single Wall Pipe and Fittings
46. ASTM F3240-19e Standard Practice for Installation of Seamless Molded Hydrophilic Gaskets (SMHG) for Long-Term Watertightness of Cured-in-Place Rehabilitation of Main and Lateral Pipelines
47. ASTM F3346-19 Standard Specification for Polyethylene of Raised Temperature/Aluminum/Polyethylene of Raised Temperature (PE-RT/AL/PE-RT) Composite Pressure Pipe
48. ASTM F3378/F3378M-22 Standard Specification for Crosslinkable Polyethylene (CX-PE) Pipe
49. ASTM F3564-22 Standard Practice for Determining Allowable Tensile Load for Polyamide-12 (PA12) Gas Pipe During Pull-In Installation