ASTM BOS 01.09

 ASTM Book of Standard, Volume 01.09:
Fasteners; Rolling Element Bearings

ASTM Volume 01.09 is a collection of ASTM standards covering industrial fasteners and rolling element bearings used in critical mechanical and structural applications.

This volume includes internationally recognized specifications for bolts, screws, studs, nuts, washers, rivets, anchor fasteners, threaded rods, and precision rolling bearings.
The standards define requirements for material composition, mechanical properties, heat treatment, dimensional tolerances, surface coatings, corrosion resistance, inspection procedures, and quality assurance.

ASTM Volume 01.09 supports the design, manufacturing, testing, and certification of fastening systems and bearing components for demanding engineering environments. These standards are widely applied in the oil & gas, petrochemical, power generation, construction, automotive, aerospace, railway, marine, and heavy manufacturing industries.

Download the complete ASTM Volume 01.09 collection, from ParsOctan .

List of Standards (ASTM BOS 01.09)

PART-1 (SERI-A)
________________

1. ASTM A31-14 Standard Specification for Steel Rivets and Bars for Rivets, Pressure Vessels
2. ASTM A193/A193M-24 Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications
3. ASTM A194/A194M-24 Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
4. ASTM A307-14 Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength
5. ASTM A320/A320M-24 Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service
6. ASTM A354-17e2 Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners
7. ASTM A394–08 (Reapproved 2015) Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare
8. ASTM A449-14(2020) Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use
9. ASTM A489-12 Standard Specification for Carbon Steel Eyebolts
10. ASTM A502–03 (Reapproved 2015) Standard Specification for Rivets, Steel, Structural
11. ASTM A540/A540M-15 (2021) Standard Specification for Alloy-Steel Bolting for Special Applications
12. ASTM A563/A563M-21E Standard Specification for Carbon and Alloy Steel Nuts (Inch and Metric)
13. ASTM A574-16 Standard Specification for Alloy Steel Socket-Head Cap Screws

PART-2 (F432 to F1941 )
________________

1. ASTM F432-13 Standard Specification for Roof and Rock Bolts and Accessories
2. ASTM F436 -16 Standard Specification for Hardened Steel Washers Inch and Metric Dimensions
3. ASTM F467-13 Standard Specification for Nonferrous Nuts for General Use
4. ASTM F467M–06a (Reapproved 2012) Standard Specification for Nonferrous Nuts for General Use (Metric)
5. ASTM F468-23 Standard Specification for Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use
6. ASTM F468M-06(2018) Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use (Metric)
7. ASTM F541-12(2020) Standard Specification for Alloy Steel Eyebolts
8. ASTM F547-22 Standard Terminology of Nails for Use with Wood and Wood-Base Materials
9. ASTM F593-22 Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs
10. ASTM F594-22 Standard Specification for Stainless Steel Nuts
11. ASTM F606/F606M-16 Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets
12. ASTM F680–80 (Reapproved 2012) Standard Test Methods for Nails
13. ASTM F788/F788M-20 Standard Specification for Surface Discontinuities of Bolts, Screws, Studs, and Rivets, Inch and Metric Series
14. ASTM F812/F812M-12 Standard Specification for Surface Discontinuities of Nuts, Inch and Metric Series
15. ASTM F835-13 Standard Specification for Alloy Steel Socket Button, Low and Flat Countersunk Head Cap Screws
16. ASTM F837-16 Standard Specification for Stainless Steel Socket Head Cap Screws
17. ASTM F844-19 Standard Specification for Washers, Steel, Plain (Flat), Unhardened for General Use
18. ASTM F879-15 Standard Specification for Stainless Steel Socket Button, Low and Flat Countersunk Head Cap Screws
19. ASTM F880-24 Standard Specification for Stainless Steel Socket, Square Head, and Slotted Headless-Set Screws
20. ASTM F901-01 (Reapproved 2017) Standard Specification for Aluminum Transmission Tower Bolts and Nuts
21. ASTM F912-11 Standard Specification for Alloy Steel Socket Set Screws
22. ASTM F959/F959M-15 Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners, Inch and Metric Series
23. ASTM F1136/F1136M-11 Standard Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners
24. ASTM F1137/F1137M-19 Standard Specification for Phosphate/Oil Corrosion Protective Coatings for Fasteners
25. ASTM F1428-92 (Reapproved 2017) Standard Specification for Aluminum Particle-Filled Basecoat/Organic or Inorganic Topcoat, Corrosion Protective Coatings for Fasteners
26. ASTM F1470-24 Standard Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection
27. ASTM F1554-20 Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength
28. ASTM F1575/F1575M-03 (Reapproved 2013) Standard Test Method for Determining Bending Yield Moment of Nails, Spikes, and Dowel-type Threaded Fasteners
29. ASTM F1667/F1667M-21a Standard Specification for Driven Fasteners: Nails, Spikes, and Staples
30. ASTM F1789-17a Standard Terminology for F16 Mechanical Fasteners
31. ASTM F1940-07a(2014) Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners
32. ASTM F1941/F1941M-16 Standard Specification for Electrodeposited Coatings on Mechanical Fasteners, Inch and Metric

PART-3 (F2094 to END )
________________

1. ASTM F2094-14e Standard Specification for Silicon Nitride Bearing Balls
2. ASTM F2161-10 Standard Guide for Instrument and Precision Bearing Lubricants—Part 1 Oils
3. ASTM F2162-01(2016) Standard Specification for Bearing, Roller, Needle: Drawn Outer Ring, Full Complement, Without Inner Ring, Open and Closed End, Standard Type
4. ASTM F2163-01(2016) Standard Specification for Ring, Bearing, Inner: for Needle Roller Bearing With Drawn Outer Ring
5. ASTM F2246-06(2013) Standard Specification for Bearing, Roller, Needle: Thick Outer Ring With Rollers and Cage
6. ASTM F2281-04(2012) Standard Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and Studs, for Heat Resistance and High Temperature Applications
7. ASTM F2282-18 Standard Specification for Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners
8. ASTM F2328-17 Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs, and Nuts
9. ASTM F2328M-14 Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs, and Nuts (Metric)
10. ASTM F2329/F2329M-15 Standard Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners
11. ASTM F2332-06(2013) Standard Specification for Annular Ball Bearings for Instruments and Precision Rotating Components
12. ASTM F2430-04(2012) Standard Specification for Bearing, Roller, Needle: Assembly (Thick Outer Race)
13. ASTM F2431-04(2012) Standard Specification for Ring Bearing, Inner: For Needle Roller Bearing with Thick Outer Ring
14. ASTM F2437-14 Standard Specification for Carbon and Alloy Steel Compressible-Washer-Type Direct Tension Indicators for Use with Cap Screws, Bolts, Anchors, and Studs
15. ASTM F2443-04(2012) Standard Specification for Roller, Bearing, Needle, Ferrous, Solid, Spherical End
16. ASTM F2444-04(2012) Standard Practice for Damage Prevention of Bearings, and Bearing Components Through Proper Handling Techniques
17. ASTM F2482-08 (Reapproved 2015) Standard Specification for Load-Indicating Externally Threaded Fasteners
18. ASTM F2488-05(2013) Standard Terminology for Rolling Element Bearings
19. ASTM F2489-06(2013) Standard Guide for Instrument and Precision Bearing Lubricants—Part 2 Greases
20. ASTM F2511-05(2013) Standard Specification for Rollers, Bearing, Needle, Ferrous, Solid
21. ASTM F2590-06(2013) Standard Specification for Bearing, Roller, Thrust, Two Channeled Race Surface, Rigid or Flat Seat Type
22. ASTM F2591-06(2013) Standard Specification for Bearing, Roller, Tapered, Single Row of Rollers (Metric Series)
23. ASTM F2660-13 Standard Test Method for Qualifying Coatings for Use on F3125 Grade A490 Structural Bolts Relative to Environmental Hydrogen Embrittlement
24. ASTM F2661-07(2015) Standard Test Method for Determining the Tribological Behavior and the Relative Lifetime of a Fluid Lubricant using the Spiral Orbit Tribometer
25. ASTM F2730/F2730M-14 Standard Specification for Silicon Nitride Cylindrical Bearing Rollers
26. ASTM F2832-11(2016) Standard Guide for Accelerated Corrosion Testing for Mechanical Fasteners
27. ASTM F2833-11 Standard Specification for Corrosion Protective Fastener Coatings with Zinc Rich Base Coat and Aluminum Organic/Inorganic Type
28. ASTM F2882/F2882M-12 Standard Specification for Screws, Alloy Steel, Heat Treated, 170 ksi and 1170 MPa Minimum Tensile Strength (Inch and Metric)
29. ASTM F2953-12 Standard Specification for Phenolic Raw Materials for the Use in Bearing Cages
30. ASTM F3019-14 Standard Specification for Chromium Free Zinc-Flake Composite, with or without Integral Lubricant, Corrosion Protective Coatings for Fasteners
31. ASTM F3042-13 Standard Specification for Nonferrous Hex Socket, Slotted Headless, and Square Head Set Screws
32. ASTM F3043-15 Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Alloy Steel, Heat Treated, 200 ksi Minimum Tensile Strength
33. ASTM F3111-16 Standard Specification for Heavy Hex Structural Bolt/Nut/Washer Assemblies, Alloy Steel, Heat Treated, 200 ksi Minimum Tensile Strength
34. ASTM F3125-23 Standard Specification for High Strength Structural Bolts and Assemblies, Steel and Alloy Steel, Heat Treated, Inch Dimensions 120 ksi and 150 ksi Minimum Tensile Strength, and Metric Dimensions 830 MPa and 1040 MPa Minimum Tensile Strength
35. ASTM F3131-14 Standard Specification for Epoxy / Cotton Raw Materials for the Use in Bearing Cages
36. ASTM F3148-15 Standard Specification for High Strength Structural Bolt Assemblies, Steel and Alloy Steel, Heat Treated, 144ksi Minimum Tensile Strength, Inch Dimensions
37. ASTM F3393-20e Standard Specification for Zinc-Flake Coating Systems for Fasteners